Field-proven, IP67-rated, and thermally optimized power conversion modules designed for OEM automotive integrators, industrial machinery manufacturers, and custom power system builders across Turkey.
Turkey has rapidly transitioned into one of Europe's and the Middle East's primary manufacturing hubs for electric commercial vehicles, industrial automation, and renewable energy conversion. Supported by mega-initiatives such as the national electric vehicle platform (TOGG), major e-bus manufacturers in Karsan, Otokar, and Temsa, as well as an aggressive expansion of 5G telecommunication networks led by Turkcell and Türk Telekom, the demand for high-reliability, OEM/ODM customized DC-DC power converters and On-Board Chargers (OBC) has reached an unprecedented scale.
Operating power electronics within Turkey requires navigating severe environmental contrasts—from sub-zero winter temperatures in Eastern Anatolia to high ambient heat (>+45°C) in Mediterranean industrial zones—alongside demanding grid fluctuations. Standard off-the-shelf power modules frequently fall short under these combined stresses. As a global designer and original equipment manufacturer (OEM/ODM), NetPower provides tailored topology platforms, customized enclosure footprints (from DOSA-compliant micro-bricks to 5kW liquid-cooled vehicle modules), and strict compliance with EU/Turkish electromagnetic standards (ECE R10, EN 50155, CISPR 25).
Compare standard parameters against custom OEM/ODM engineering options available for domestic Turkish production lines.
| Platform Family | Standard Input Voltages | Custom OEM Options | Thermal Management | Primary Application in Turkey |
|---|---|---|---|---|
| e-Mobility OBC & DC-DC Combos | 100V–200V, 180V–400V, 400V–650V | Dual CAN 2.0B / J1939, Custom Harnesses, V2L/V2G | Liquid Cooled / Air Cooled / Cold Plate | Electric Buses, Light Commercial Trucks (Bursa/Kocaeli) |
| Isolated Board-Mount Bricks | 9-36V, 18-75V, 36-75V, 66-160V | 1/32nd to Full Brick, Encapsulated SIP/DIP | Conduction Baseplate / Custom Heatsink | Telecom Base Stations, Railway Rolling Stock (ASELSAN specs) |
| Non-Isolated POL Converters | 2.5V – 60V Wide Input | DOSA Footprint Match, PMBus Digital Control | Forced Air / Natural Convection | Edge Data Centers, FPGA/ASIC Industrial Logic Boards |
| High-Power Bus Converters | 180V–400V DC / 3-Phase AC | Custom Mechanical Enclosure, Parallel Active Sharing | Liquid Cooling (Glycol/Water Mix) | Off-Highway Mining, AGVs, Electric Tractors |
How NetPower OEM/ODM custom power modules resolve engineering challenges across Turkey's key industrial sectors.
The Marmara industrial corridor (Bursa, Kocaeli, Sakarya) represents the epicenter of Turkish automotive export manufacturing. Municipal fleets in Istanbul and Ankara are rapidly replacing diesel buses with zero-emission electric buses. NetPower’s integrated 3.3kW / 6.6kW OBCs combined with 1.8kW–5kW DC-DC converters step down high-voltage traction battery power (400V/800V) to low-voltage 12V/24V auxiliary rails. These units feature IP67 sealing to withstand harsh winter road-salt spraying and high-vibration chassis mounting, engineered to meet ISO 26262 functional safety and ECE R10 EMI specifications.
Telecom operators across Turkey (Turkcell, Türk Telekom) face challenging environmental setups for remote cellular towers situated in mountainous regions. Grid instability and wide temperature swings necessitate isolated DC-DC converters capable of taking erratic 36V-75V telecom bus inputs and providing regulated 12V, 5V, or 3.3V power to sensitive 5G transceivers. NetPower half-brick and quarter-brick converters feature low noise ripple, elevated MTBF (>2 million hours), and conduction cooling that eliminates mechanical fan maintenance in remote tower cabinets.
Automated Guided Vehicles (AGVs) and warehouse logistics robots used in Izmir's logistics terminals and Aegean manufacturing centers demand fast-charging, vibration-resistant, highly compact battery chargers. NetPower’s 3.3kW fast chargers and non-isolated Point-of-Load (POL) buck regulators integrate directly onto motor drive controllers, delivering up to 96% efficiency to minimize energy loss and internal heat buildup in totally enclosed unventilated chassis.
As Turkish OEMs push for faster charging times and higher vehicle powertrain efficiency, the shift from 400V to 800V battery architectures is accelerating. NetPower’s Next-Gen Silicon Carbide (SiC) MOSFET-based OBC and DC-DC modules deliver higher switching frequencies, smaller magnetic footprints, and lower thermal dissipation—essential for modern Turkish e-mobility platforms.
Turkish industrial buyers and defense contractors prioritize flexible OEM/ODM partners capable of tailoring mechanical dimensions, thermal interfaces, connector pinouts, and embedded CAN firmware (J1939/CANopen) without imposing exorbitant NRE costs or demanding unrealistic minimum order quantities (MOQs).
Because Turkey exports a vast portion of its automotive and commercial vehicles directly into the European Union, component suppliers must ensure rigorous adherence to EU standards—including CE marking, RoHS/REACH environmental compliance, ECE R10 for EMC, and EN 50155 for rail applications.
Decades of field-proven reliability, automated production lines, and direct engineering collaboration for your Turkish production lines.
Every NetPower product platform undergoes thorough worst-case circuit stress analysis, thermal simulation, and HALT/HASS testing before volume release. 100% of manufactured modules pass automated optical inspection (AOI) and automated end-of-line functional testing with full material lot traceability.
From micro-power modules and 1/32nd, 1/16th, 1/8th, quarter, half, and full brick board-mounted isolated DC-DC converters to 1kW–5kW vehicle-grade liquid-cooled power assemblies, engineers can easily scale power capacity across an entire platform without redesigning base board layouts.
Our power engineering team works directly with your technical group from early prototype phases to volume scaling. We offer rapid turnarounds on mechanical modification, thermal derating curve verification, layout optimization, and EMC compliance testing tailored to Turkish factory deployments.
Accelerate your product development cycle in Turkey with high-efficiency, vehicle-grade DC-DC converters, integrated on-board chargers, and custom board-mount power bricks built to withstand demanding environments.