Liquid-, air- and conduction-cooled platforms engineered for electric trucks, buses and off-highway fleets.
Open-frame and encapsulated bricks with industry-standard footprints and wide-input flexibility.
High-density buck regulators for FPGA, ASIC and processor rails on dense system boards.
Cannot find a match? NetPower engineers modify standard platforms or build full-custom converters — see Custom Solutions.
From sub-15W board-mounted bricks to 5kW vehicle-grade converters, every NetPower platform is developed around three fixed priorities: measured efficiency, thermal margin and long-term field reliability.
Vehicle-grade DC-DC converters and on-board charger platforms for electric commercial transportation.
Open-frame and encapsulated bricks in industry-standard footprints for distributed power architectures.
Point-of-load regulators that sit close to the processor and hold tight tolerance under fast load steps.
Heatsinks, filters, baseplates and mounting hardware that complete a qualified power sub-system.
Derivative designs and ground-up developments that inherit the reliability record of our standard platforms.
Form-, fit- and function-oriented replacements that keep mature production lines running.
NetPower modules power products from early-stage innovators through to globally recognised OEM brands. That installed base — accumulated across telecom infrastructure, datacom, industrial automation, railway and electric vehicle programmes — is the evidence behind every efficiency and MTBF figure we publish. Our engineering team combines decades of switch-mode power design experience with a disciplined quality system, so what performs on the bench also survives the field.
Each market imposes a different constraint — altitude and vibration, 24/7 uptime, ambient heat or automotive shock and EMC. Our platform selection guidance starts from those constraints, not from a datasheet headline.
48V intermediate bus and half-brick architectures for base stations, line cards, switches and server power shelves.
Wide-input encapsulated modules for PLCs, drives, robotics and instrumentation exposed to noise and surge.
High-voltage input converters with reinforced isolation and shock/vibration resistance for rolling-stock electronics.
HV-to-LV DC-DC converters and OBC platforms for e-trucks, buses, off-highway machinery and specialty EVs.
Information that helps you design faster: what we verify, what we document, and what you receive with the sample.
Component de-rating rules, thermal simulation and worst-case loop analysis are applied before the first prototype, so efficiency curves hold across the full temperature and line range.
Airflow-versus-derating data, baseplate temperature limits and conducted-emission results are published in our application notes to shorten your compliance cycle.
Automated optical inspection, burn-in screening, 100% functional test and lot-level material traceability support audit and field-return analysis.
Technical questions reach application engineers, not a script — from topology selection and paralleling to layout review and qualification testing.
Where our engineering team has been, and which platforms have entered production most recently.
Our application engineers presented the e-Mobility converter roadmap and discussed HV-to-LV architecture choices with commercial vehicle integrators on site.
Scalable on-board charging blocks designed for electric buses and trucks, with configurable power levels, CAN communication and sealed thermal packaging.
A high-density HV-to-LV converter delivering 5kW continuous output with high peak efficiency, wide input range and vehicle-grade environmental protection.
NetPower is a technology leader in open-frame and encapsulated high-efficiency, high-density DC-DC and AC-DC power converters. NetPower board-mount isolated DC to DC power modules are available from sub 15W to over 1000W in standard micro-power module, 1/32nd brick, 1/16th brick, 1/8th brick, quarter brick, half brick and full brick packages. Input voltage ranges of the isolated DC-DC converters include 9-36V, 9-75V, 18-36V, 18-75V, 36-75V, 16-160V, 34-160V, 66-160V, 180-400V, 300-500V and 400-650V.
NetPower non-isolated DC-DC converters provide a wide input voltage range from 2.5V to 60V in DOSA standard footprints, supporting the low-voltage, high-current rails of modern FPGAs, ASICs and network processors. NetPower e-Mobility converters exhibit industry-leading performance and can be customised for specific vehicle platforms, cooling strategies and communication protocols.
In addition to standard DC/DC converters and EV on-board DC-to-DC converters, NetPower designs and manufactures semi-custom and full-custom DC-DC power products that inherit the same merits of high performance and high reliability. Overseas buyers, contract manufacturers and design houses are supported through a global network of sales channels and direct technical support — the right partner for power solutions.